Xargaha alxanka nikel, ErNiCu-7, Monel 400/K500 Xargaha alxanka
Xargaha alxanka nikel, ErNiCu-7, Monel 400/K500 silig alxanka,
AWS A5.14 ErNiCu7, Monel 400/K500 alxanka nikel, silig alxanka nikel,
ErNicu-7 (Monel 400/K500) Xargaha alxanka
♦Qalabka Alxanka Magaca: Xargaha alxanka nikel, ErNiCu-7, Monel 400/K500 Xargaha alxanka
♦MOQ:15kg
♦Foomka: MIG (15kgs/spool), TIG(5kgs/sanduuq)
♦Cabbirka: Dhexroorka 0.01mm-8.0mm
♦Cabirka Guud: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Heerarka: Waafaqsan Shahaadada AWS A5.14 ASME SFA A5.14
Nala soo xidhiidh si aad wax badan u barato!
ErNiCu-7 Qalabka ku salaysan waa Monel 400 iyo Monel K500, Siligan alxanka waxaa inta badan loo isticmaalaa alxanka MONEL400, MONELR404 daawaha iyo MOENLK-500 daawaha tungsten inert-gaaska alxanka, MGW iyo alxanka arc quuska, iyo sidoo kale waxaa loo isticmaali karaa alxanka dusha sare. by MGW iyo alxanka arc quusay.
Waxaa lagu talinayaa in la isticmaalo daboolka siliga Erni-1 nikkel xaaladaha alxanka gaarka ah.
ERNiCu-7 Halabuurka Kiimikada
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Mid kale |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | Bal | 1.5-3.0 | ≤0.50 |
ERNiCu-7 Halbeegyada Alxanka ee Caadiga ah
| Dhexroorka | Habka | Volt | Amps | Gaaska gaashaanka | |
| In | mm | ||||
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | 75% Argon+25% Helium |
| 0.045 | 1.2 | GMAW | 28-32 | 180-220 | 75% Argon+25% Helium |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | 75% Argon+25% Helium |
| 0.035 | 0.9 | GTAW | 12-15 | 60-90 | 100% Argon |
| 0.045 | 1.2 | GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | SAW | 28-30 | 275-350 | Dhaqdhaqaaq ku habboon ayaa laga yaabaa inuu isticmaalo |
| 1/8 | 3.2 | SAW | 29-32 | 350-450 | Dhaqdhaqaaq ku habboon ayaa laga yaabaa inuu isticmaalo |
| 5/32 | 4.0 | SAW | 30-33 | 400-550 | Dhaqdhaqaaq ku habboon ayaa laga yaabaa inuu isticmaalo |
ERNiCu-7 Guryaha Makaanikada
| Xaalad | Xoojinta Xoojinta MPa (ksi) | Awood-soo-saarka MPa (ksi) | Kordhinta% |
| dib u habeynta AWS | 480(70) Caadi ah | Oo aan lagu cayimin | Oo aan lagu cayimin |
| Natiijooyinka caadiga ah sida alxanka | 530 (77) | 360 (53) | 34 |
Waa maxay sababta ERNiCu-7?
•Looma baahna kulayl ka hor, heerkulka ugu badnaan ee isdhaafsiga 150 ℃ iyo PwHT looma baahna
•Codsiyada alxanka ee aan la midka ahayn waxaa ka mid ah ku biirista alwaaxyada Nickel 200 iyo naxaasta-nickel-ka-
•Si weyn loogu isticmaalo codsiyada badda sababtoo ah iska caabbinta wanaagsan ee saameynta xun ee biyaha badda iyo biyaha jilicsan
•Waxaa loo isticmaali karaa MIG ku dahaadhan birta ka dib lakabka koowaad ee leh nikkel 208
MOQ:15kg
Foomka: MIG (15kgs/spool), TIG(5kgs/sanduuq)
Cabbirka: Dhexroorka 0.01mm-8.0mm Cabbirka Caadiga ah:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Heerarka: Waafaqsan Shahaadada AWS A5.14 ASME SFA A5.14
